Get a compliant recommendation in minutes. Tell us about your door and route, and we’ll suggest the right device family, matching accessories, and useful links to datasheets, pricing and compliance.
Describe the door & route – single/double (centre mullion or not), public access (EN 1125) or trained-only (EN 179), fire door, re-entry needs, threshold detail.
Get a recommendation – we map the scenario to Rim / Vertical-Rod / Mortise (EN 1125) or Bolt / Latch (EN 179), plus the outside trim, euro cylinder, and strikes/keepers.
Proceed – open the matching product page, download templates, or send the spec with your photos for an itemised quote.
Device family fit: e.g., EN 1125 Rim (single public door) or EN 1125 Vertical-Rod pairs (no centre mullion).
Accessory checklist: outside trim (lever/knob/paddle), euro cylinder (key–key / key–thumbturn, length to sit flush), strikes & keepers (head + recessed floor strike preferred on vertical-rod; surface strike where recess isn’t feasible).
Deep links to product pages, datasheets and installation templates.
Budget bands (hardware only): from the UK ex-VAT baseline; see the full guide below.
Compliance notes where relevant (especially for fire doors).
See devices → EN 1125 /products/panic-exit-devices-en-1125/ · EN 179 /products/emergency-exit-devices-en-179/
Accessories → /products/accessories/
Single public door: EN 1125 Rim + (if re-entry) Outside Trim + Euro Cylinder.
→ /products/panic-exit-devices-en-1125/rim/
Double, no centre mullion: EN 1125 Vertical-Rod pairs with head keeper + recessed floor strike (preferable).
→ /products/panic-exit-devices-en-1125/vertical-rod/
Double, centre mullion: Paired Rim with mullion keepers; service-friendly and avoids floor recessing.
→ /products/panic-exit-devices-en-1125/double-door-kits/
Trained-only internal single door: EN 179 push pad/lever (check route classification).
→ /products/emergency-exit-devices-en-179/
Accessories quick links → Outside Trims /products/accessories/outside-trim-handles/
· Cylinders /products/accessories/cylinder-kits/
· Strikes & Keepers /products/accessories/strikes-keepers/
· Dogging Covers /products/accessories/dogging-keys-covers/
Use these indicative UK ex-VAT bands to plan hardware cost (installation excluded). Regional currencies can be derived using your preferred rate.
EN 1125 – Rim (single): £45–£120
EN 1125 – Vertical-Rod (pairs): £110–£350+
EN 1125 – Mortise (flush aesthetic): £125–£200+
EN 179 – Push pad/lever (single): £80–£130+
Outside Trim: £60–£170+ · Euro Cylinder: £10–£65+ · Strikes/Keepers: £5–£40+
Full pricing guide → /knowledge/cost-pricing-uk/ · Request a Quote → /quote/
Door Size & Compatibility (guide + Excel template) → /knowledge/door-size-compatibility/
Installation templates & datasheets → /downloads/installation-pdfs/
Inspection Checklist (fillable PDF) → /compliance/inspection-checklist/
Maintenance Cheat Sheet (A4) → /knowledge/maintenance-troubleshooting/
Do I need EN 1125 or EN 179?
Public access routes require EN 1125 (full-width touch bar). EN 179 applies to routes used by trained staff only.
What should I choose for double doors without a centre mullion?
Use EN 1125 Vertical-Rod pairs with a head keeper and a recessed floor strike wherever possible.
When do I need outside trim and a euro cylinder?
Only when controlled re-entry is required from the safe side. Match cylinder length to your door thickness for a flush finish.
Can these be used on fire doors?
Yes, provided that device, strikes/keepers and fixings all match the door’s certificate and the relevant approvals.
Upload your door photos, counts (single or pairs), centre mullion/threshold details, fire-door status and any re-entry needs. We’ll return a compliant specification with an itemised price in £.
→ Request a Quote /quote/