Warehouse Exit Solutions (Exit Devices EN 1125 & EN 179) 

Design warehouse exit routes that open fast, relatch reliably and pass inspection. Use Exit Devices EN 1125 touch bars on public or visitor-accessible routes and Exit Devices EN 179 devices on staff-only internal link doors. EKIN maps each door to the right configuration, with matched accessories and fire-door documentation. 

Typical warehouse door sets & recommended configurations

1) Wide paired exits on aisles or near assembly points (public):

• Exit Devices EN 1125 vertical-rod pairs with head keepers and recessed floor strikes for two-point latching and stable relatching under vibration and heavy trolleys.
  
  

• If a centre mullion is used, consider paired rim devices with mullion keepers.
  Links → Vertical-Rod · Double-Door Kits · Strikes & Keepers
  
  

2) External single emergency exits on perimeter walls (public):

• Exit Devices EN 1125 rim touch bar; add outside trim & cylinder for controlled re-entry by supervisors.
  Links → Rim · Outside Trim · Cylinder Kits
  
  

3) Loading bay lobby / cross-corridor pairs (public):

• Exit Devices EN 1125 vertical-rod with surface strikes where recessed floor pockets are impractical due to slab or drainage details.
  Link → Strikes & Keepers
  
  

4) Internal link doors and plant rooms (trained-only):

• Exit Devices EN 179 latch/bolt (lever or push pad) on single internal doors with staff training and signage.
  Links → Exit Devices EN 179 Latch· EN 179 Bolt
  
  

5) Design-led front-of-house/visitor routes:

• Exit Devices EN 1125 mortise for a flush aesthetic where kit is visible to visitors.
  Link → Mortise

Accessories for warehouses (re-entry, heavy traffic & durability)

• Outside trims & cylinders for controlled re-entry (key–key or key–thumbturn); select trims compatible with rim, vertical-rod or mortise devices.
  Links → Outside Trim · Cylinder Kits
  
  

• Strikes & keepers to suit thresholds and slab details: recessed floor strikes for durability, or surface strikes where recessing isn’t possible. Include mullion keepers for paired rim configurations.
  Link → Strikes & Keepers
  
  

• Dogging keys & covers for non-fire doors during staged picking, cleaning or events—under written policy.
  Link → Dogging Keys & Covers

Compliance & inspection (UK-focused, globally applicable)

• Match approvals: device + strikes/keepers + fixings must align with the door certificate (especially on fire doors).

• Maintain clear signage and keep hardware unobstructed by racking, pallets or bump rails.
  
  

• Keep an inspection log (operating force, relatching, fixings, signage) at planned intervals.
  Resources → Inspection Checklist (PDF) · How to Install · Maintenance

Case snapshot

A fulfilment centre replaced mixed hardware with Exit Devices EN 1125 vertical-rod pairs on main aisle exits (recessed floor strikes) and EN 1125 rim on perimeter singles with outside trims for supervisor re-entry. EN 179 devices were used on internal plant rooms. The site passed audit with fewer call-outs due to improved keeper seating.

FAQ (Warehouses)

Q1: Vertical-rod or rim for paired exits?
If there is no centre mullion, choose vertical-rod for two-point latching. With a centre mullion, paired rim devices with mullion keepers are appropriate.

Q2: Recessed floor strike or surface strike?
Use a recessed floor strike where the slab allows a pocket and protection plate; otherwise specify a surface strike rated for the finished floor and traffic.

Q3: Can we use Exit Devices EN 179 on warehouse exits?
Only on staff-only internal doors. Public or mixed-use routes require Exit Devices EN 1125.

Q4: Are these devices fire-door compatible?
Many are, but approvals must match your door certificate—including strikes/keepers and fixings.

Q5: What causes slow return after forklift traffic?
Often keeper misalignment, slab movement or loose fixings. Re-check the template, latch throw and closer speed; tighten progressively and log the adjustments.

Send site layout (aisles/perimeter/loading bay), door photos, single or double, centre mullion/threshold details, fire-door status and any re-entry needs. We’ll propose a compliant warehouse configuration with an itemised price in £.

• Request a Quote
  
  

• Use the Selector