Emergency Exit Bolt (Push Pad)EN 179 

An EN 179 emergency exit bolt uses a push pad to release a single-point latch/bolt on staff-only or trained-only doors. It differs from EN 1125 touch bars used for public areas: EN 179 requires users who are familiar with the exit. EKIN supplies bolt devices with UK-focused guidance on installation height, compatible keepers and fire-door use. 

What is an EN 179 emergency exit bolt?

A compact push pad mounted near the lock side actuates a single-point latch/bolt to allow quick egress in trained-only spaces (offices, back-of-house, plant rooms). Choose a bolt device when you need a simple, intuitive release on a single internal door and public access is not expected.
Need EN 1125 for public areas? → /products/panic-exit-devices-en-1125/

Key benefits

• Simple, compact hardware — minimal projection around the lock side.

• Trained-only operation — suits staff exits and internal routes.

• Straightforward servicing — clear keeper engagement and easy checks.

• Clean look — pairs well with modern office/back-of-house doors.

Sizing & compatibility (quick checks)

• Door width & thickness within device range; confirm handing and swing.

• Single vs double — bolts are typically for single internal doors; for pairs on main egress, check EN 1125 vertical-rod.

• Frame & keeper — choose a keeper that matches timber or steel frames and door clearances.

• Fire-door? Ensure the device + keeper + fixings are approved for your door certificate.

• Signage — use compliant emergency-exit signs; keep the device unobstructed.
  Sizing help → /knowledge/door-size-compatibility/

Keeper & strike notes (fit first time)

Correct engagement is vital to avoid drag or slow return:

• Match the keeper profile to the frame material and reveal.

• Verify latch/bolt throw and seating; shim/pack as required.

• Test relatching with the door closer before final tightening.
  See compatible parts → Accessories /products/accessories/

Fire-door & compliance notes

• EN 179 applies to trained-only spaces; if the public may use the exit, specify EN 1125.

• Many bolt devices are fire-door compatible when used with specified keepers and fixings—always match approvals to your door certificate.

• Keep an inspection log: operating force, alignment, fixings and signage.
  Read more → EN 179 Guide · Inspection Checklist (PDF) 

Recommended accessories

• Outside trims & cylinders for controlled re-entry from the safe side (where permitted).

• Strikes/keepers matched to timber/steel frames.

• Finishes to suit office/back-of-house interiors.
  Browse → /products/accessories/

Installation & documentation

• How to Install — recommended height, template drilling, keeper alignment. /knowledge/how-to-install-push-bar/

• Maintenance & Troubleshooting — mis-alignment, drag, or slow return checks. /knowledge/maintenance-troubleshooting/

• Downloads & datasheets — /downloads/installation-pdfs/

Where emergency exit bolts fit best

• Offices & meeting rooms (staff-only)

• Back-of-house corridors in retail/hospitality

• Plant & technical rooms for trained personnel
  See more use cases → /solutions/

FAQ (EN 179 bolt)

Q1: When should I choose an EN 179 bolt instead of EN 1125?
Use a bolt in trained-only areas on single doors. If the public may need to exit, specify EN 1125.

Q2: Are bolt devices fire-door compatible?
Many are; confirm the device, keeper and fixings match your door’s fire certificate before drilling.

Q3: What’s the recommended installation height?
Follow the manufacturer’s template and the recommended height range; verify signage and clear opening dimensions.

Q4: Can I add an outside handle or key?
Yes—use a compatible outside trim and, if required, a cylinder. Ensure compatibility with your bolt device.

Q5: Can bolts be used on double doors?
Typically EN 179 bolts are for single internal doors. For pairs on main egress, consider EN 1125 vertical-rod or double-door kits.

Send door width/thickness, trained-only use (yes/no), fire-door status, frame details and photos. We’ll propose a compliant EN 179 bolt configuration with an itemised price in £/$.

• Request a Quote → /quote/

• Use the Selector → /tools/product-selector/